QP Update 7.04.17 - Structure Editor enhancements
Posted: Sun Nov 24, 2024 9:32 am
In this update, there are three new features in the Structure Editor Window:
1. The item's voltage setting or interpretation is now clearly shown
2. Guy wires are now able to be suppressed from a structure's analysis. This may be useful in special cases, where guy wires are not actually required to support the pole, but used for less priority features such as services only; which cannot withstand full wind load cases. This should be used with caution and the understanding/acceptance of service guying failures if all load cases actually occur, on existing (not new) pole lines.
3. The Notes field/column is now fully enabled to use with any item.
1. The item's voltage setting or interpretation is now clearly shown
2. Guy wires are now able to be suppressed from a structure's analysis. This may be useful in special cases, where guy wires are not actually required to support the pole, but used for less priority features such as services only; which cannot withstand full wind load cases. This should be used with caution and the understanding/acceptance of service guying failures if all load cases actually occur, on existing (not new) pole lines.
3. The Notes field/column is now fully enabled to use with any item.