QP Update 7.02.19 - Midspan Separation tests & Bug fix
Posted: Wed Apr 03, 2024 10:47 am
This update expands the mid-span separation tests required for code compliance for both the NESC and CSA standards.
In both codes there special requirements around neutral wires and their proximity to Communications Plant. In this update we now include tests for higher voltages than 22,000 volts, which prevents these neutral wire special rules from being applicable. Also for the CSA standard, there is also another limitation that primary and neutral wires cannot be at the same height (within 0.3m, 12") for these special neutral wire rules. Although not very common, these additional details are now taken into account.
The new look for the Structure Editor has been made more accommodating for smaller displays.
A bug was fixed related to changing the Pole Species of multiple structures, or their importing. The drop-down choices were not matching the type of pole selected.
A bug was fixed related to sags & tensions and re-verification of results posted on our website.
In both codes there special requirements around neutral wires and their proximity to Communications Plant. In this update we now include tests for higher voltages than 22,000 volts, which prevents these neutral wire special rules from being applicable. Also for the CSA standard, there is also another limitation that primary and neutral wires cannot be at the same height (within 0.3m, 12") for these special neutral wire rules. Although not very common, these additional details are now taken into account.
The new look for the Structure Editor has been made more accommodating for smaller displays.
A bug was fixed related to changing the Pole Species of multiple structures, or their importing. The drop-down choices were not matching the type of pole selected.
A bug was fixed related to sags & tensions and re-verification of results posted on our website.